Skip to Main Content
Email this item to a friend
Email this to a Friend
  • Friend's Email:*
  • Your Email:*
  • Your Name:*
  • Message:
Serta Upholstery by Hughes Furniture 5600 Accent Chair - Item Number: 3010 C
Occasional Accent Chair by Serta Upholstery by Hughes Furniture
Print this page
Serta Upholstery by Hughes Furniture 5600 Occasional Accent Chair

5600 Occasional Accent Chair by Serta Upholstery by Hughes Furniture

Part of the 5600 Collection
Sku: 3010 C
Width: 36  x  Depth: 33  x  Height: 38
Add To Room Plan
Item Description

5600 Accent Chair

This occasional accent chair is a charming piece that has been created in contemporary transitional style. The perfect piece to combine with its coordinating collection, or to place with an array of existing furniture pieces, this stunning accent chair features a stream-lined design with a fine fabric upholstery that creates an aesthetic modern look. Exposed wood feet and slightly flared arms keep this chair corresponding with traditional design elements, allowing it to blend in with nearly any new or existing furniture style.

The 5600 Occasional Accent Chair by Serta Upholstery by Hughes Furniture from Darvin Furniture. We proudly serve the Orland Park, Chicago, IL area. Product availability may vary. Contact us for the most current availability on this product.


5600 Accent Chair Specifications

Item & Dimensions
ManufacturerSerta Upholstery by Hughes Furniture
Width (side to side)36" W
Depth (front to back)33" D
Height (bottom to top)38" H
Fabric & Upholstery
Fabric OptionsAvailable in Upholstery Shown
Style Elements
Arm TypeTrack Arm
ArmContemporary Track Arms with Slight Outward Flair
Seat BackTight Pulled Seat Back with Contemporary Silhouette
SeatPlush Upholstered Seat Cushion for Superior Seated Comfort
Leg or SkirtContemporary Tapered Block Legs
Construction & Warranty
Frame ConstructionFrames are built in-house with hardwood, such as oak, ash, birch, or maple (70%) and plywood or OSB (30%). Lumber is cut and graded in Manufacturers own machine room to help insure quality for the foundation of our recliners. Only hardwood lumber is used, never plywood or OSB in stress points or load-bearing areas of frames. Individual frame pieces are reinforced in the corners and stress points by glue, blocks and staples, much more preferable than nails or screws.
Seat SupportSprings are machine tested for durability and lasting support. A sturdy frame provides an anchor for good seating support, while the filling or cushion, augments it. In frames, 8 gauge no-sag wide loop sinuous springs are “s” shaped and run from the front of the seat to the back. An additional 16-gauge stakewire is attached across from side to side to support these springs. This process is done by pneumatically clamping the springs together to tie the individual springs into one unit to prevent the springs from separating or twisting. Back spring clips are autolocking and are made from nylon to help reduce noise. Back springs are 12-gauge sinuous wire. Seat spring clips are constructed from metal to provide strength and are nylon-lined, reducing noise. This makes for a strong seat and provides superior support.
Padding & ErgonomicsSeat cushions and frame parts are fabricated in manufacturer’s own foam fabrication facilities to control the quality and feel of each piece. Cushion thickness is kept at a minimum of 4.5 inches to promote comfort and support. Cushions are fabricated from superior (1.8 lb. density, 34-lb. compression) foam and wrapped in 1oz. or 1.8 oz Dacron for comfort and protection. All foams are made with Environmentally-friendly Polyol derived from soy beans and castor beans that require up to 60% less fossil fuel resources than petroleum-based polyols (for every 11 pounds of plant-based polyol, a gallon of crude oil is saved. This results in 36% less global warming emissions). Test results are monitored from every shipment, every day to maintain consistency. Backs and pillows are air-blown with polyurethane foam or polyester fiber to contour to the body for maximum support and comfort.
Collection Description

Serta Upholstery by Hughes Furniture 5600 Description

This contemporary living room collection features plush upholstered pieces that are aimed at providing a chic sophisticated look with a comfortable relaxed feel. A stream-lined frame construction with track arms and exposed wood legs, gives this furniture set an appearance that keeps it looking clean while bold colored fabric provides a distinguished elegance. The perfect collection for formal, casual and contemporary styled homes, this furniture set features a sofa, loveseat and chair that can be used together or placed as modern accent pieces.

The 5600 collection is a great option if you are looking for Contemporary furniture in the Orland Park, Chicago, IL area.

Collection Details

These images are representative of this group as a whole and may differ from this item.

Flowing Silhouettes Create Chic Stream-Lined Style
Related Items

This item has been tagged as: Rocker, Rocking Chair, Nursery Furniture, Nursery Rocking Chair, Glider, Nursery Glider, Glider Chair, Glider Rocker, Glider Rocking Chair, Glider Rocking Chair, Childrens Room Rocking Chair, Chair and a Half, Chair and a Half Recliner, Chair and a Half Sleeper, Chair and a Half with Ottoman, Big Chair, Oversized Chair, Chair and Ottoman, Ottoman Chair, Chair and Ottoman Set, Accent Chair, Chaise, Chaise Lounge, Small Chaise, Chaise Lounge Chair, Custom Chaise Lounge, Chaise Lounger, Double Chair, Exposed Wood Chair, Accent Chair with Wood Arms or Legs, Exposed Wood Seating, Exposed Wood Pieces, Wing Chair, Wingback Chair, Queen Anne Chair, Easy Chair, Fireplace Chair, Daybed

Reference #: 3010 C

Drag an
Item Here

Click the or drag a product image here to save it to your QuickList
Active Project
Load a Project